Clear Coat-MAX-2007

Clear Coat-car paint-auto paint MAX-2007 Clear Coat Kit Substrates: 1K basecoat Mixing Ratio <18°C MAX-2007 Clear Coat 100 parts MAX-07 Fast Drying Hardener 50 parts M-1 Thinner 10-30 parts ≥18°C MAX-2007 Clear Coat 100 parts MAX-07 Standard Hardener 50 parts M-1 or M-2 Thinner 10-30 parts Pot Life: At 25°C, MAX-07 Fast Drying Hardener: 1 hours; MAX-07 Standard Hardener: 1.5 hours No. of Coats: 2-3 coats, total 40-50um Flash-off Time: 4-8 minutes between coats, 25°C, allow 15 minutes air-drying time before baking. Spray Gun & Pressure Gravity Feed 1.2-1.5mm 3-5kg/cm2 Siphon Feed 1.4-1.7mm 3-5kg/cm2 Drying Time: Temperature Dust Free Tack Free Dry to Handle Thorough Dry 25°C 20 minutes 30 minutes 5-6 hours 6 days 70°C 5 minutes 10 minutes 15 minutes 45 minutes Sandability and Polishability: Dust particles and minor damages or sagging area can be sanded out with P2000 wet after the finish is completely dry. Compound and polish to restore gloss. Shelf Life: 2 years in original sealed can at cool and dry place at 20°C Packaging: (5L+2.5L+1L) Kit Note: 1. When ambient temperature is lower than 15°C, air-dry is not recommended. Allow a full bake at 60°C. 2. At ambient temperature higher than 30°C, add Retarder Solvent into thinner to avoid blushing. Details please refer to the technical data sheet of Retarder Solvent. 3. In the events of fisheyes during application, add 0.5-1% Anti Silicon in the paint remained and respray the affected area. 4. In the overspray area, apply directly Thinner SRA to achieve an invisible transition. Details please refer to the technical data sheet of Thinner SRA. 5. When mixed with hardener, the products should be used up soon and can not restore for future use. 6. Clean equipments immediately with solvent after application.