Auto Paint-1K Basecoat Metallic Colors

Auto Paint/Metallic Colors/Car paint EC-1K Basecoat Metallic Colors Substrates: Dried and sanded existing finishes, and Maxytone series primers Surface Cleaning: Remove wax, silicon, and other contaminations with degreaser. Mixing Ratio: <15°C EC-1K Basecoat100 parts M-5 Thinner60-80 parts 15-30°C EC-1K Basecoat100 parts M-1 Thinner60-80 parts >30°C EC-1K Basecoat100 parts M-2 Thinner60-80 parts NO.of Coats: 2-3 coats,total 15-25um Flash-off time: At 25°C,5-10 minutes between coats. Allow 15-20minutes air-drying time before applying clear coat. Spray Gun &Pressure Gravity Feed 1.2-1.5mm 2-4kg/cm2 Siphon Feed 1.4-1.7mm 2-4kg/cm2 Re-coat: Re-coat with all kinds of Maxytone clear coat Shelf life: 2 years in original sealed can at cool and dry place at 20°C Packaging: 1L, 3.75L Note: 1. If the existing finish is not compatible, 2K primer surfacer should be used as a sealing layer before applying the basecoat otherwise there may be problems such as lifting, peeling, blistering, flooding, etc. 2. At temperature over 30°Cor in high humidity, it is recommended to use MAX-3960 Retarder Solvent to avoid mottling. 3. Because of the high transparency of metallic basecoat, the primer surfacer should be in consistent color and flat without any sand scratches, seediness, or unevenness so as to prevent defects of mottling, poor metallic effect, etc. 4. To avoid problems of mottling or poor adhesion, the metallic paint film should not be thicker than 25um. 5. Better effect could be achieved if the extra silver powder could be removed with tack rag after the flash-off of every layer.